View 74VCXH162245_356179.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
74VCXH162245
LOW VOLTAGE CMOS 16-BIT BUS TRANSCEIVER (3-STATE) WITH 3.6V TOLERANT INPUTS AND OUTPUTS
s s
s
s
s
s
s s
s
s s s
3.6V TOLERANT INPUTS AND OUTPUTS HIGH SPEED A OUTPUTS: tPD = 3.4 ns (MAX.) at VCC = 3.0 to 3.6V tPD = 4.3 ns (MAX.) at VCC = 2.3 to 2.7V SYMMETRICAL IMPEDANCE A OUTPUTS: |IOH| = IOL = 12 mA (MIN) at VCC = 3.0V |IOH| = IOL = 8 mA (MIN) at VCC = 2.3V HIGH SPEED B OUTPUTS: tPD = 2.5 ns (MAX.) at VCC = 3.0 to 3.6V tPD = 3.2 ns (MAX.) at VCC = 2.3 to 2.7V SYMMETRICAL IMPEDANCE B OUTPUTS: |IOH| = IOL = 24 mA (MIN) at VCC = 3.0V |IOH| = IOL = 18 mA (MIN) at VCC = 2.3V POWER-DOWN PROTECTION ON INPUTS AND OUTPUTS 26 SERIES RESITORS IN A PORT OUTPUT OPERATING VOLTAGE RANGE: VCC (OPR) = 2.3V to 3.6V PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 16245 BUS HOLD PROVIDED ON BOTH SIDES LATCH-UP PERFORMANCE EXCEEDS 300mA ESD PERFORMANCE: HBM >2000V; MM > 200V
T (TSSOP48 Package) ORDER CODES : 74VCXH162245T
PIN CONNECTION
DESCRIPTION The VCXH162245 is a low voltage CMOS 16-BIT BUS TRANSCEIVER (3-STATE) fabricated with sub-micron silicon gate and five layer metal wiring C2MOS technology. It is ideal for low power and very high speed 2.3 to 3.6V applications; it can be interfaced to 3.6V signal enviroment for both inputs and outputs. This IC is intended for two-way asynchronous communication beetwen data buses; the direction of data trasmission is determined by DIR input. The two enable inputs nG can be used to disable the device so that the buses are effectively isolated. The device circuits is including 26 series resistance in the A port outputs. These resistors permit to reduce line noise in high speed applications. Bus hold on data inputs is provided in order to eliminate the need for external pull-up or pull-down resistor. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
March 1999 1/11
74VCXH162245
INPUT AND OUTPUT EQUIVALENT CIRCUIT
PIN DESCRIPTION
PIN No 1 2, 3, 5, 6, 8, 9, 11, 12 13, 14, 16, 17, 19, 20, 22, 23 24 25 36, 35, 33, 32, 30, 29, 27, 26 47, 46, 44, 43, 41, 40, 38, 37 48 4,10, 15, 21, 28, 34, 39, 45 7, 18, 31, 42 SYMBOL 1DIR 1B0 to 1B7 2B0 to 2B7 NAME AND FUNCT ION Directional Control Data Inputs/Outputs Data Inputs/Outputs
IEC LOGIC SYMBOLS
2DIR 2G 2A0 to 2A7
Directional Control Output Enable Input Data Inputs/Outputs
1A0 to 1A7
Data Inputs/Outputs
1G GND VCC
Output Enalel Input Ground (0V) Positive Supply Voltage
TRUTH TABLE
INPUT G L L H
X:"H" or "L" Z: High impedance
F UNCTION DIR L H X A BUS OUTPUT INPUT Z B BUS INPUT OUTPUT Z
OUT PUT A= B B= A Z
2/11
74VCXH162245
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VI VO VO IIK IOK IO ICC orIGND PD Tstg TL Supply Voltage DC Input Voltage DC Output Voltage (OFF state) DC Output Voltage (High or Low State) (note1) DC Input Diode Current DC Output Diode Current (note2) DC Output Source/Sink Current DC VCC or Ground Current Per Supply Pin Power Dissipation Storage Temperature Lead Temperature (10 sec) Parameter Value -0.5 to + 4.6 -0.5 to + 4.6 -0.5 to + 4.6 -0.5 to VCC + 0.5 - 50 50 50 100 400 -65 to +150 300 Unit V V V V mA mA mA mA mW
o o
C C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. 1) IO absolute maximum rating must be observed 2) VO < GND, VO > VCC
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VO VO IOH, IOL IOH, IOL IOH, IOL IOH, IOL Top dt/dv Supply Voltage Input Voltage Output Voltage (OFF state) Output Voltage (High or Low State) High or Low Level Output Current - A side (VCC=3.0 to 3.6V) High or Low Level Output Current - A side (VCC=2.3 to 2.7V) High or Low Level Output Current - B side (VCC=3.0 to 3.6V) High or Low Level Output Current - B side (VCC=2.3 to 2.7V) Operating Temperature: Input Transition Rise or Fall Rate (V CC = 3.0V) (note 1) Parameter Value 2.3 to 3.6 -0.3 to 3.6 0 to 3.6 0 to VCC 12 8 24 18 -40 to +85 0 to 10 Unit V V V V mA mA mA mA
o
C
ns/V
1) VIN from0.8V to 2.0V, VCC= 3.0V
3/11
74VCXH162245
DC SPECIFICATIONS (2.7V < VCC 3.6V unless otherwise specified)
Symb ol Parameter V CC (V) VIH VIL VOH High Level Input Voltage Low Level Input Voltage High Level Output Voltage (A Outputs) 2.7 to 3.6 2.7 to 3.6 2.7 3.0 3.0 VOH High Level Output Voltage (B Outputs) 2.7 to 3.6 2.7 3.0 3.0 VOL Low Level Output Voltage (A Outputs) 2.7 to 3.6 2.7 3.0 3.0 VOL Low Level Output Voltage (B Outputs) 2.7 to 3.6 2.7 3.0 3.0 II II(HOLD) Input Leakage Current Input Hold Current 2.7 to 3.6 3 3.6 IOZ Ioff ICC ICC 3 State Output Leakage Current Power Off Leakage Current Quiescent Supply Current ICC incr. per input 2.7 to 3.6 0 2.7 to 3.6 2.7 to 3.6 VI = VIH or VIL VI = VIH or VIL VI = VIH or VIL VI = VIH or VIL IO=-100 A IO=-6 mA IO=-8 mA IO=-12 mA IO=-100 A IO=-12 mA IO=-18 mA IO=-24 mA IO=100 A IO=6 mA IO=8 mA IO=12 mA IO=100 A IO=12 mA IO=18 mA IO=24 mA VI = VCC orGND VI = 0.8 V VI = 2 V VI = 0 to 3.6 V VI = VIH orVIL VO = 0 to 3.6V VI orVO = 0 to 3.6V VI = VCC orGND VI orVO = VCC to 3.6 V VIH = VCC -0.6V 75 -75 500 10 10 20 20 750 A A A A Test Co nditi ons Value -40 to 85 C Min. 2.0 0.8 VCC-0.2 2.2 2.4 2.2 VCC-0.2 2.2 2.4 2.2 0.2 0.4 0.55 0.8 0.2 0.4 0.4 0.55 5 A A V V V V Max. V V
o
Un it
4/11
74VCXH162245
DC SPECIFICATIONS (2.3V < VCC 2.7V unless otherwise specified)
Symb ol Parameter V CC (V) VIH VIL VOH High Level Input Voltage Low Level Input Voltage High Level Output Voltage (A Outputs) 2.3 to 2.7 2.3 to 2.7 2.3 2.3 2.3 VOH High Level Output Voltage (B Outputs) 2.3 to 2.7 2.3 2.3 2.3 VOL Low Level Output Voltage (A Outputs) Low Level Output Voltage (B Outputs) Input Leakage Current Input Hold Current 3 State Output Leakage Current Power Off Leakage Current Quiescent Supply Current 2.3 to 2.7 2.3 2.3 VOL 2.3 to 2.7 2.3 2.3 II II(HOLD) IOZ Ioff ICC 2.3 to 2.7 2.3 2.3 to 2.7 0 2.3 to 2.7 VI = VIH or VIL VI = VIH or VIL VI = VIH or VIL VI = VIH or VIL IO=-100 A IO=-4 mA IO=-6 mA IO=-8 mA IO=-100 A IO=-6 mA IO=-12 mA IO=-18 mA IO=100 A IO=6 mA IO=8 mA IO=100 A IO=12 mA IO=18 mA VI = VCC orGND VI = 0.7 V VI = 1.7 V VI = VIH orVIL VO = 0 to 3.6V VI orVO = 0 to 3.6V VI = VCC orGND VI orVO = VCC to 3.6 V 45 -45 10 10 20 20 A A A Test Co nditi ons Value -40 to 85 C Min. 1.6 0.7 VCC-0.2 2.0 1.8 1.7 VCC-0.2 2.0 1.8 1.7 0.2 0.4 0.6 0.2 0.4 0.6 5 A A V V V V Max. V V
o
Un it
5/11
74VCXH162245
DYNAMIC SWITCHING CHARACTERISTICS (Ta = 25oC, Input tr = tf = 2.0ns, CL = 30pF)
Symb ol Parameter V CC (V) VOLP VOLP VOLV VOLV VOHV VOHV Dynamic Peak Low Voltage Quiet Output (note 1, 3), A to B Dynamic Peak Low Voltage Quiet Output (note 1, 3) B to A Dynamic Valley Low Voltage Quiet Output (note 1, 3) A to B Dynamic Valley Low Voltage Quiet Output (note 1, 3) B to A Dynamic Valley High Voltage Quiet Output (note 2, 3) A to B Dynamic Valley High Voltage Quiet Output (note 2, 3) B to A 2.5 3.3 2.5 3.3 2.5 3.3 2.5 3.3 2.5 3.3 2.5 3.3 VIL = 0 V VIH = VCC VIL = 0 V VIH = VCC VIL = 0 V VIH = VCC VIL = 0 V VIH = VCC VIL = 0 V VIH = VCC VIL = 0 V VIH = VCC Test Con dition s Min . Value T A = 25 C T yp. 0.6 0.8 0.25 0.35 -0.6 -0.8 -0.25 -0.35 1.9 2.2 2.05 2.65 Max. V V V V V V
o
Un it
1) Number ofoutputs defined as "n". Measured with"n-1" outputs switching from HIGH to LOW or LOW t o HIGH. The remaining output is measured in the LOW state. 2) Number ofoutputs defined as "n". Measured with"n-1" outputs switching from HIGH to LOW or LOW t o HIGH. The remaining output is measured in the HIGH state. 3) Parameters guaranteed by design.
6/11
74VCXH162245
AC ELECTRICAL CHARACTERISTICS (CL = 30 pF, RL = 500 , Input tr = tf = 2.0 ns)
Symb ol Parameter V CC (V) tPLH tPHL tPLH tPHL tPZL tPZH tPZL tPZH tPLZ tPHZ tPLZ tPHZ tOSLH tOSHL Propagation Delay Time A to B Propagation Delay Time B to A Output Enable Time A to B Output Enable Time B to A Output Disable Time A to B Output Disable Time B to A Output to Output Skew Time (note 1, 2) 2.3 to 2.7 3.0 to 3.6 2.3 to 2.7 3.0 to 3.6 2.3 to 2.7 3.0 to 3.6 2.3 to 2.7 3.0 to 3.6 2.3 to 2.7 3.0 to 3.6 2.3 to 2.7 3.0 to 3.6 2.3 to 2.7 3.0 to 3.6 Test Co nditi on Waveform Value -40 to 85 C Min. Max. 1.0 0.8 1.0 0.8 1.0 0.8 1.0 0.8 1.0 0.8 1.0 0.8 3.2 2.5 4.3 3.4 4.9 3.8 5.7 4.2 4.2 3.7 4.8 4.1 0.5 0.5 ns ns ns ns ns ns ns
o
Un it
1 1 2 2 2 2
1) Skew is defined as the absolute value of the difference between the actual propagation delay for any twooutputs of the same device switching in the same direction, either HIGH or LOW (tOSLH = |tPLHm - tPLHn|, tOSHL = |tPHLm - tpHLn|) 2) Parameter guaranteed by design
CAPACITIVE CHARACTERISTICS
Symb ol Parameter V CC (V) CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance (note 1) 2.5 or 3.3 2.5 or 3.3 2.5 or 3.3 VIN = 0V or VCC VIN = 0V or VCC fIN = 10MHz VIN = 0V or VCC Test Co nditi ons Min. Valu e T A = 25 oC T yp. 4 8 28 Max. pF pF pF Un it
1) CPD isdefined as the value of the IC'sinternal equivalent capacitance which is calculated fromthe operating current consumption without load. Average operting current can be obtained by the following equation. I CC(opr) = CPD * VCC * fIN + ICC/16 (per circuit)
7/11
74VCXH162245
TEST CIRCUIT
T EST tPLH , tPHL tPZL , tPLZ (VCC = 3.0 to 3.6V) tPZL , tPLZ (VCC = 2.3 to 2.7V ) tPZH , tPHZ
CL = 30 pF or equivalent (includes jigand probe capacitance) RL = R1 = 500 orequivalent RT = ZOUT of pulse generator (typically 50)
SW IT CH Open 6V 2VCC GND
WAVEFORM SYMBOL VALUES
Symbo l 3.0 to 3.6V VIH VM VX VY 2.7V 1.5V VOL + 0.3V VOH - 0.3V V CC 2.3 to 2.7V VCC VCC/2 VOL + 0.15V VOH - 0.15V
8/11
74VCXH162245
WAVEFORM 1: PROPAGATION DELAYS (f=1MHz; 50% duty cicle)
WAVEFORM 2: OUTPUT ENABLE AND DISABLE TIME (f=1MHz; 50% duty cicle)
9/11
74VCXH162245
TSSOP48 MECHANICAL DATA
mm MIN. A A1 A2 b c D E E1 e K L 0o 0.50 0.05 0.85 0.17 0.09 12.4 7.95 6.0 12.5 8.1 6.1 0.5 BSC 4o 0.60 8o 0.70 0o 0.020 0.10 0.9 TYP. MAX. 1.1 0.15 0.95 0.27 0.20 12.6 8.25 6.2 0.002 0.335 0.0067 0.0035 0.408 0.313 0.236 0.492 0.319 0.240 0.0197 BSC 4o 0.024 8o 0.028 0.004 0.354 MIN. inch TYP. MAX. 0.433 0.006 0.374 0.011 0.0079 0.496 0.325 0.244
DIM.
A
A2 A1 b e K c L E
D
E1
PIN 1 IDENTIFICATION
1
10/11
74VCXH162245
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com .
11/11

▲Up To Search▲

Price & Availability of 74VCXH162245

	To Download 74VCXH162245 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .